Heavy Duty Connector Electrical Connectors HD-015-FC 09210153101

• Customization: Available
• Material: Aluminum
• Certification: CE, ISO 9001, RoHs
• Model NO.: SO-HD-015
• Application: Power
• Interface Type: Transmision of Electrical
• Operating Frequency: Low Frequency
• Support Card Number: All in One
• Gender: Female and Male
• Poles: 8-16
• Housings: Plastic
• Contact Finish: Sliver Plated or Gold Plated
• Fastening Type: Screw Terminal
• Termination: Screw Terminal
• Mounting Type: Screw Terminal
• Product Usage: Heavy Duty Connectors
• Transport Package: Carton
• Trademark: SMICO
• Origin: China
• HS Code: 8536909000
• Production Capacity: 100000

Product Description

About Us

Zhejiang SMICO Electric Power Equipment Co., Ltd. Located in Yueqing City, the China Electrical City .

SMICO was founded more than 20 years and exported to 158 countries. The factory covers an area of 32,000 mm² and has 180 employee

The function of the heavy-duty connector

1. Electrical insulation between connectors to avoid interference between signals.

2. Fix the position of the connector, which is conducive to plugging and unplugging and the stability of the position.

3. Provide mechanical protection and support for the insert body.

4. Separate the connector from the application environment, reduce environmental pollution and corrosion of the connector, and extend the service life of the connector.
 

The advantages of heavy-duty connectors

1. Realize pre-installation, pre-installation of a large number of complicated circuits, which can greatly improve the efficiency of equipment installation and reduce the rate of wiring errors.

2. The heavy-duty connector provides a highly integrated connection, and the abundant combination methods maximize the effective utilization of the equipment space.

3. Heavy-duty connector The connector conveniently and efficiently realizes the modular structure of each functional template block in the equipment, so that the equipment can be transported, installed, maintained and repaired conveniently and safely. Connectors are widely used in the field of power transmission and distribution.

4. The high protection level (IP65, IP68) provided by the heavy-duty connector is incomparable to the advantages of the equipment connection system in the harsh environment. Provide effective protection in harsh environments such as sand, dust, rain, cold, ice and snow, and oil pollution.
 

heavy-duty connector wiring method

1. Loosen the screw with a screwdriver, put the wire into the side hole of the insert, and then tighten the screw.

2. To install the upper shell of the heavy-duty connector, use a screwdriver to unscrew the fixing screws of the insert, put the insert into the upper shell, and then tighten the fixing screws.

3. For the installation of the lower shell of the heavy-duty connector, use the same method to fix the lower shell, and insert the upper shell and the lower shell of the inserted body into each other.
Heavy-duty connectors, also known as HDC heavy-duty connectors, aviation plugs, are widely used in construction machinery, textile machinery, packaging and printing machinery, tobacco machinery, robots, rail transit, hot runners, electricity, automation, etc. that require electrical and signal connections In the device.
15 Poles+PE,16A,screw male insert
 

Inserts	Suitable Shell:6BHood/Housing
Number of contacts	15
Electrical data acc. to EN 61 984
---Rated current	16A
---Rated voltage conductor	500V
---Rated impulse voltage	6kV
---Pollution degree	3
---Pollution degree 2 also	16A 400/690V 6kV 2
Rated voltage acc. to UL/CSA	600V
Insulation resistance	≥1010Ω
Material	polycarbonate
Limiting temperatures	-40ºC...+125ºC
Flammability acc. to UL 94	V0
Mechanical working life(mating cycles)	≥500
Contacts
Material	copper alloy
Surface	hard-gold plated
	hard-silver plated
Contact resistance	≤1mΩ
Screw terminal
---Wrie gauge	0.14-2.5mm2
---AWG	26-14
---Tightening/Test torque	0.5N·m
---Stripping length	7.0mm

FAQ
Q1. Are you a manufacturer or trading company?
Smico:We are a professional manufacturer of waterproof connectors with our own factory and Marketing Department.

Q2. What is the lead time?
Smico:Normally speaking, it asks for 5-20 days for mass production except during observed holidays.

Q3.What certification do you have?
Smico:The electrical connector have got CE Rohs2.0  certification for our products.

Q4: Where is the Distribution of product's industrial base?
Smico:Yueqing,Wenzhou,Zhejiang

Q5.Where can be used this kind of connector
SMICO:Smico Industrial connector now widely used in the fields of measurement,medical,audio-video,navigation,security,aviation,industrial control,automo-tive and power etc.